Issues

• Coincident FaceIntersect classifies a tolerant edge copy at the faces' tolerance and misses its crossings

  tangency-labs/solidcore#3168 · Filter by author dudedagger42 opened on Nov 8, 2026
  1

• Setback corner: no case checks a far cut on a round along an arc edge

  tangency-labs/solidcore#3165 · Filter by author MarkusReichart opened on Nov 8, 2026

• Setback corner: a grown setback past the rails' reach is refused naming no size

  tangency-labs/solidcore#3164 · Filter by author MarkusReichart opened on Nov 8, 2026

• Setback corner: a far corner placed after the fill does not bound the setback

  tangency-labs/solidcore#3163 · Filter by author MarkusReichart opened on Nov 8, 2026

• Setback corner: the edge's room does not know where a far corner cuts the round

  tangency-labs/solidcore#3162 · Filter by author MarkusReichart opened on Nov 8, 2026

• A boolean operand that touches itself along a line carried as two coincident edges fails (relate 1001 or not a closed solid)

  tangency-labs/solidcore#3160 · Filter by author dudedagger42 opened on Nov 8, 2026

• A B-spline curve whose control points share a coordinate evaluates off it by a few ulps

  tangency-labs/solidcore#3159 · Filter by author bherbruck opened on Nov 8, 2026

• ops shell refuses (1001) a stock the kernel's shell_brep_simple builds

  tangency-labs/solidcore#3158 · Filter by author bherbruck opened on Nov 8, 2026

• a rotational sweep of three regions touching in a chain fails check_brep (SmShell::Test #22/#23)

  tangency-labs/solidcore#3157 · Filter by author jmcopp opened on Nov 8, 2026

• a full rotational sweep of a profile with a nearly radial edge fails check_brep (SmFace::Test #36)

  tangency-labs/solidcore#3156 · Filter by author jmcopp opened on Nov 8, 2026

• solidcore-tess: 10-60x slower than SolidCraft's tess on spline-heavy bodies, most of it in eval::collapse

  tangency-labs/solidcore#3152 · Filter by author bherbruck opened on Nov 8, 2026

• Boolean: a tool face a hair outside the face it coincides with, at a tangent junction, gives a body out of tolerance or no body

  tangency-labs/solidcore#3150 · Filter by author dudedagger42 opened on Nov 8, 2026
  1

• recertify: a blend extended across its section is refused, though its extension is certified

  tangency-labs/solidcore#3148 · Filter by author bherbruck opened on Nov 8, 2026

• Projected All minimum over vertices and a bounded line omits line-endpoint answers

  tangency-labs/solidcore#3147 · Filter by author ChrisNourse opened on Nov 8, 2026

• ops computes no geometry: the remaining operator sites, and a lint that sees them

  tangency-labs/solidcore#3145 · Filter by author bherbruck opened on Nov 8, 2026

• kernel + ops: an exact contact test between bodies in place of SolidCraft's mesh-based Body::meets

  tangency-labs/solidcore#3144 · Filter by author bherbruck opened on Nov 8, 2026

• ops: exact face and edge properties and volume in place of SolidCraft's mesh-based Body::faces, edges and volume_at

  tangency-labs/solidcore#3143 · Filter by author bherbruck opened on Nov 8, 2026
  1

• kernel + ops: continuity report (G0 to G4 across an edge) and curvature combs as ops calls

  tangency-labs/solidcore#3142 · Filter by author bherbruck opened on Nov 8, 2026
  1

• ops: the tangent-chain walk on record order, the exact smooth-edge test, and the face chain

  tangency-labs/solidcore#3141 · Filter by author bherbruck opened on Nov 8, 2026
  1

• kernel + ops: lofts along guide rails and multi-section blends, built in the kernel

  tangency-labs/solidcore#3140 · Filter by author bherbruck opened on Nov 8, 2026

• kernel + ops: sweep stations from laws (frame, twist, end scale, orientation, guide rails) instead of SolidCraft's app-side frames

  tangency-labs/solidcore#3139 · Filter by author bherbruck opened on Nov 8, 2026

• ops: SolidCraft's offset and shell recipes, with offset-copy history from the kernel instead of distances and meshes

  tangency-labs/solidcore#3138 · Filter by author bherbruck opened on Nov 8, 2026

• solidcore-convert in place of SolidCraft's flat-array hop: parity on the corpus, the export report and history pieces

  tangency-labs/solidcore#3137 · Filter by author bherbruck opened on Nov 8, 2026

• blend: an exact nodal-quartic round that runs into its node (generic-blend §3.1, the round fading to nothing)

  tangency-labs/solidcore#3136 · Filter by author bherbruck opened on Nov 8, 2026

• A sphere far from the origin fails its analytic label check (flat arrays: a NURBS form that is not its analytic surface)

  tangency-labs/solidcore#3131 · Filter by author bherbruck opened on Nov 8, 2026
  1