diff --git a/content/usrp.rst b/content/usrp.rst index 0dacfef8..4b278f45 100644 --- a/content/usrp.rst +++ b/content/usrp.rst @@ -319,6 +319,12 @@ If it seems like it's not working, but is not throwing any errors, try changing For debugging sake, you can verify the 10 MHz signal is showing up to the USRP by checking the return of :code:`usrp.get_mboard_sensor("ref_locked", 0)`. If the PPS signal isn't showing up, you'll know it because the first while loop in the code above will never finish. +********************************************** +Phase Coherent Sync of Multiple B210s for MIMO +********************************************** + +In order to perform operations like direction of arrival (DOA) and phased array digital beamforming, you typically need all receive channels to be phase coherent, meaning the relative phases between the receive channels stay constant and can be calibrated out. The B200 and B210 USRPs are based on the AD9361 RFIC, which generates the LO internally, there is no way to feed it an external LO, so even if you feed the USRP a 10 MHz reference signal and PPS, that will only allow multiple USRPs to synchronized in frequency and sample clock, not phase, because every time the device turns on or changes frequency, there is a new random phase offset due to the dividers in the VCO/PLL chains, for more information see `this page `_. One method to achieve phase sync is to add hardware that involves taking a calibration signal (either generated by the USRP, or wideband noise source, or tone), splitting it, and feeding it into all receive ports, and performing a quick calibration each time the USRPs are turned on or retuned. Note that changing the gain will also lead to phase shifts, but as long as the B210's are kept at the same gain the phase difference shouldn't change significantly. The `Techtile project `_ has additional information on this topic, including custom images that may allow multiple B210s to retune together so that they maintain sync, although it likely still requires calibration with external hardware each time the radios turn on. + **** GPIO **** diff --git a/spelling_wordlist.txt b/spelling_wordlist.txt index 22c1a9cc..2953551a 100644 --- a/spelling_wordlist.txt +++ b/spelling_wordlist.txt @@ -296,3 +296,5 @@ heatmap Durbin dBi Marcovici +Techtile +retuned